(337) 886-7282 llssa@llssa.org

L1-06E.04 – Connect the RJ31 X

L1-06E.04 – Connect the RJ31 X Check the instructions for the proper order of connecting devices. Note: you may use an RJ31x cord with a landline, cell phone or other communications...

L1-06E.03 Connect the Power

L1-06E.03 Connect the Power Check the instructions for the proper order of connecting devices. Some panels will only startup correctly if the transformer is powered up first.  Others need the battery connected...

L1-06E.02 Connect the Sensors

L1-06E.02 Connect the Sensors Make sure you wire the sensor to match how you program the zone. If you programmed the zone to alarm when the circuit closes make sure you wire the sensor so that it normally keeps the circuit open but closes on alarm. Wire the resistor...

L1-06D.33 – Restore the System

L1-06D.33 – Restore the System Notify your monitoring center after you have finished all testing to restore the system to normal operation...